EERIS
Engage in the European Research Infrastructures System
Browse the registry for
technological services
equipment
infrastructures
research
innovation
Login
Sign Up
INOE 2000 - HYDRAULICS AND PNEUMATICS RESEARCH INSTITUTE (IHP Bucharest)
National Institute of R&D for Optoelectronics
Short link:
https://eeris.eu/
ERIF-2000-000J-0884
5183
Visits
Hydraulics and Pneumatics Research Institute INOE 2000-IHP in Bucharest is a research- development and engineering unit in the field of Hydraulics and Pneumatics, a subsidiary of the National Institute of Research & Development for Optoelectronics – INOE 2000. Hydraulics and Pneumatics Research Institute is structured on R&D departments and laboratories, as follows: > Department of Servo Techniques, Electronics and Mechatronics The department has specialists in servo valves, proportional hy...
Cătălin
Dumitrescu
dumitrescu.ihp@fluidas.ro
Ph.D. eng.
SCIENTIFIC TEAM
14
Ph.D. Eng. Gheorghe SOVAIALA
View profile
Dipl. eng. Sava ANGHEL
View profile
eng. Ioan BALAN
View profile
Ph.D. eng. Marian BLEJAN
View profile
Ph.D. eng. Corneliu CRISTESCU
View profile
PhD. eng. Petrin DRUMEA
View profile
Dipl. eng. Liliana DUMITRESCU
View profile
Ioana ILIE
View profile
Ph.D.eng. Ioan LEPADATU
View profile
PhD. stud. eng. Alexandru MARINESCU
View profile
PhD. eng. Gabriela MATACHE
View profile
PhD. eng. Teodor Costinel POPESCU
View profile
PhD. eng. Radu RADOI
View profile
Dipl. eng. Radu SAUCIUC
View profile
Mechanical Engineering Facilities
RI Domain of activity
Energy Engineering Facilities (non-nuclear)
RI Domain of activity
Environmental Management Infrastructures
RI Domain of activity
Energy and environment, Emergent and new technologies, Eco-nanotechnologies
RI Domain of activity
Type Of RI:
Single sited RI
RI Life Cycle Status:
Active RI
Research Data Management Plan:
No information available
Access Policy to Research Infrastructure and Related Services:
No information available
Research Services
Monitoring water quality of irrigation sources with data transmission via GSM to a dispatcher point
SERVICE DESCRIPTION:
SERVICE PERSONS:
Ph.D. Eng. Gheorghe SOVAIALA
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Providing technical solutions for recovery of rainfall water for irrigation in greenhouses
SERVICE DESCRIPTION:
SERVICE PERSONS:
Ph.D. Eng. Gheorghe SOVAIALA
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Conducting tests on soil and water quality
SERVICE DESCRIPTION:
SERVICE PERSONS:
Ph.D. Eng. Gheorghe SOVAIALA
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Monitoring the chemical structure of groundwater in areas vulnerable to pollution
SERVICE DESCRIPTION:
SERVICE PERSONS:
Ph.D. Eng. Gheorghe SOVAIALA
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Testing modular laser systems in laboratory conditions
SERVICE DESCRIPTION:
SERVICE PERSONS:
PhD. eng. Teodor Costinel POPESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Theoretical and applied research on pneumatic proportional equipment
SERVICE DESCRIPTION:
SERVICE PERSONS:
PhD. eng. Gabriela MATACHE
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Research on promoting pneumatic servo equipment and systems
SERVICE DESCRIPTION:
SERVICE PERSONS:
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Research on systematizing and developing pneumatic sensors
SERVICE DESCRIPTION:
SERVICE PERSONS:
PhD. stud. eng. Alexandru MARINESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Research on means and techniques for adjusting, multiplying and maintaining constant the air pressure in pneumatic systems
SERVICE DESCRIPTION:
SERVICE PERSONS:
PhD. eng. Gabriela MATACHE
View profile
PhD. stud. eng. Alexandru MARINESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Research on developing high-efficiency equipment used in vacuum technology
SERVICE DESCRIPTION:
SERVICE PERSONS:
PhD. eng. Gabriela MATACHE
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Studies and research on developing torque transducers compatible with pneumatic drives
SERVICE DESCRIPTION:
SERVICE PERSONS:
PhD. stud. eng. Alexandru MARINESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Studies and research on pneumatic transport and gravimetric sorting of non-ferrous waste in form of short chips for recycling
SERVICE DESCRIPTION:
SERVICE PERSONS:
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Theoretical and experimental research on functional optimization of pressure multiplying by low-cost solutions
SERVICE DESCRIPTION:
SERVICE PERSONS:
PhD. stud. eng. Alexandru MARINESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Research on energy optimization for compressed air distribution networks
SERVICE DESCRIPTION:
SERVICE PERSONS:
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Studies, methodologies and methods for advanced research on the behaviour of pneumatic drive systems using medium and high pressure pneumatic actuators, in order to improve dynamic and power performance
SERVICE DESCRIPTION:
SERVICE PERSONS:
Ph.D. Eng. Gheorghe SOVAIALA
View profile
PhD. eng. Petrin DRUMEA
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Performing computerized quality tests on pneumatic railway wagon valves
SERVICE DESCRIPTION:
SERVICE PERSONS:
PhD. eng. Teodor Costinel POPESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Theoretical and applied research on pneumatic handling equipment and industrial robots
SERVICE DESCRIPTION:
SERVICE PERSONS:
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Functional static and dynamic testing of fixed (industrial) and mobile (towed vehicles and motor vehicles) equipment
SERVICE DESCRIPTION:
SERVICE PERSONS:
Ph.D. eng. Corneliu CRISTESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Simulations of typical equipment operating modes
SERVICE DESCRIPTION:
Simulation is done for fixed equipment (industrial) and mobile (towed vehicles and vehicles), including subsystems.
SERVICE PERSONS:
Ph.D. eng. Corneliu CRISTESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Testing in order to determine the performance parameters of various sub-components of systems / equipment that use hydrostatic transmissions for power transmission drive or propulsion
SERVICE DESCRIPTION:
SERVICE PERSONS:
Ph.D. eng. Corneliu CRISTESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Checking pressure and achieving pressure control relays
SERVICE DESCRIPTION:
SERVICE PERSONS:
Ph.D. eng. Corneliu CRISTESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Checking volumetric efficiency of gear pumps
SERVICE DESCRIPTION:
SERVICE PERSONS:
Ph.D. eng. Corneliu CRISTESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Checking the tightness of the inner progressive dispensers
SERVICE DESCRIPTION:
SERVICE PERSONS:
Ph.D. eng. Corneliu CRISTESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Measuring the flow in pressurized circular pipes by using various types of devices (flow sensors, flow transducers, diaphragms, etc.)
SERVICE DESCRIPTION:
SERVICE PERSONS:
Dipl. eng. Liliana DUMITRESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Measuring flow rates in pipelines of circular cross section on the didactic stand
SERVICE DESCRIPTION:
SERVICE PERSONS:
Dipl. eng. Radu SAUCIUC
View profile
Dipl. eng. Liliana DUMITRESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Measuring switching forces occurring in distribution equipment
SERVICE DESCRIPTION:
SERVICE PERSONS:
Dipl. eng. Radu SAUCIUC
View profile
Dipl. eng. Liliana DUMITRESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Applied research and experimental testing in the field of Fluid Power for rotary hydraulic machines (pumps and motors)
SERVICE DESCRIPTION:
SERVICE PERSONS:
Ph.D.eng. Ioan LEPADATU
View profile
PhD. eng. Petrin DRUMEA
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Applied research and experimental testing in the field of Fluid Power for hydraulic parts and equipment
SERVICE DESCRIPTION:
Applied research and experimental testing in the field of Fluid Power for hydraulic parts and equipment (adjustment and distribution equipment, auxiliary equipment, etc.)
SERVICE PERSONS:
Ph.D.eng. Ioan LEPADATU
View profile
PhD. eng. Petrin DRUMEA
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Determination of control characteristic of proportional pressure valves
SERVICE DESCRIPTION:
SERVICE PERSONS:
eng. Ioan BALAN
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Determination of control characteristic of electro-hydraulic proportional directional valves
SERVICE DESCRIPTION:
SERVICE PERSONS:
eng. Ioan BALAN
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Determination of control characteristic of servo valves
SERVICE DESCRIPTION:
SERVICE PERSONS:
eng. Ioan BALAN
View profile
PhD. eng. Radu RADOI
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Determination of frequency response for electro-hydraulic proportional directional valves
SERVICE DESCRIPTION:
SERVICE PERSONS:
eng. Ioan BALAN
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Determination of frequency response for servo valves
SERVICE DESCRIPTION:
SERVICE PERSONS:
eng. Ioan BALAN
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Determining the response to step signal for electro-hydraulic proportional directional valves
SERVICE DESCRIPTION:
SERVICE PERSONS:
eng. Ioan BALAN
View profile
PhD. eng. Radu RADOI
View profile
Ph.D. eng. Marian BLEJAN
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Determining the response to step signal for servo valves
SERVICE DESCRIPTION:
SERVICE PERSONS:
eng. Ioan BALAN
View profile
PhD. eng. Radu RADOI
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Testing and tuning control loops for hydraulic actuators (cylinders and rotary motors)
SERVICE DESCRIPTION:
SERVICE PERSONS:
eng. Ioan BALAN
View profile
Ph.D. eng. Marian BLEJAN
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Computer Aided Design for electronic / electric schemes
SERVICE DESCRIPTION:
SERVICE PERSONS:
PhD. eng. Radu RADOI
View profile
Ph.D. eng. Marian BLEJAN
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Simulation of electronic schemes
SERVICE DESCRIPTION:
SERVICE PERSONS:
PhD. eng. Radu RADOI
View profile
Ph.D. eng. Marian BLEJAN
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Development of computer-assisted layouts for electronic modules
SERVICE DESCRIPTION:
SERVICE PERSONS:
PhD. eng. Radu RADOI
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Development of logic blocks with relays or programmable automation logic for electric automations of applications at low voltages
SERVICE DESCRIPTION:
SERVICE PERSONS:
PhD. eng. Radu RADOI
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Research and physical development of ecology (environmental management) equipment
SERVICE DESCRIPTION:
Design and development of prototypes for snow melters, waste compacting presses, reverse osmosis plants, compost processing equipment, wood chopping / grinding machine, wood wastes briquetting press machine
SERVICE PERSONS:
Ph.D.eng. Ioan LEPADATU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Technological Services
Testing in laboratory conditions the operation and control elements, and also testing water-based hydraulic drive systems
SERVICE DESCRIPTION:
SERVICE PERSONS:
Ph.D. Eng. Gheorghe SOVAIALA
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Checking the valve internal flow losses, in the restricted sense of meaning
SERVICE DESCRIPTION:
SERVICE PERSONS:
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Measuring contamination of working fluids used in industrial hydraulic drives by particle counting method
SERVICE DESCRIPTION:
SERVICE PERSONS:
Dipl. eng. Radu SAUCIUC
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Measuring the characteristics of working fluids used in industrial hydraulic drives (viscosity, temperature)
SERVICE DESCRIPTION:
SERVICE PERSONS:
Dipl. eng. Radu SAUCIUC
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Checking devices for pressure measuring in hydraulic drive systems using the GPM.521.R2 calibration device
SERVICE DESCRIPTION:
SERVICE PERSONS:
Dipl. eng. Radu SAUCIUC
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Determination of the average flow speed in pipes of circular cross section
SERVICE DESCRIPTION:
SERVICE PERSONS:
Dipl. eng. Radu SAUCIUC
View profile
Dipl. eng. Liliana DUMITRESCU
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Calibration for various electro-hydraulic control equipment (proportional valves, servo valves etc.)
SERVICE DESCRIPTION:
SERVICE PERSONS:
eng. Ioan BALAN
View profile
Ph.D. eng. Marian BLEJAN
View profile
Ioana ILIE
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Assembling and testing electronic modules
SERVICE DESCRIPTION:
SERVICE PERSONS:
PhD. eng. Radu RADOI
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Design and production of sealing parts out of elastomers, PTFE, polyurethane, etc.
SERVICE DESCRIPTION:
SERVICE PERSONS:
Dipl. eng. Sava ANGHEL
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Testing of sealing systems
SERVICE DESCRIPTION:
- under maximum pressure: 350 bar - maximum diameter: 500 mm - maximum speed: 7 m/s
SERVICE PERSONS:
Dipl. eng. Sava ANGHEL
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Tensile testing on plastic and elastic materials
SERVICE DESCRIPTION:
SERVICE PERSONS:
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Tests performed in environmental test chamber (climate chamber)
SERVICE DESCRIPTION:
SERVICE PERSONS:
Dipl. eng. Sava ANGHEL
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Treatments in drying oven
SERVICE DESCRIPTION:
SERVICE PERSONS:
Dipl. eng. Sava ANGHEL
View profile
ACCESS THIS SERVICE
You need to be logged in to request access to this service. Click
here
to login.
If you don’t have an ERRIS account yet, please register
here
.
Research Equipment
1. Equipment for monitoring water quality at the irrigation source
CATALOG NAME:
DESCRIPTION:
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
Download data sheet file (205.08 kb)
2. Equipment for measuring flow in drainage tubes
CATALOG NAME:
DESCRIPTION:
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
3. System for data acquisition, storage, processing and transmission
CATALOG NAME:
DESCRIPTION:
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
4. Measure and control instruments
CATALOG NAME:
DESCRIPTION:
4.1 Thermohygrometer HI91610C 4.2 PH LOGGER Printing and Logging pH Meters with GLP and Smart Electrods 4.3 Gas analyzer 4.4 Kit for measuring parameters of a pumping system 4.5 Equipment for measuring flow in drainage tubes 4.6 Portable ultrasonic flowmeter with sensors ADM 6725 4.7 Portable digital infrared thermometer FLUKE 575 4.8 Portable device to measure roughness SURTEST-TR1001 seria 27604060 4.9 Portable device to measure hardness IMPACT-D-TH 130 seria 13508280 4.10 Digital termometer 4.11 Metal wall thickness measuring device Delta TT 4.12 DOPPLER ultra sonic measurement probe 4.13 Sonic flowmeter 4.14 Digital manometer 4.15 Multi-parameter Multi 3510 ISD Kit
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
5. Modular laser equipment TOPCON for execution and control of levelling works of agricultural lands
CATALOG NAME:
DESCRIPTION:
The modular laser equipment was developed through project CEEX 728/2006. It is intended for automatic control of working bodies (blades or buckets) of leveling machines related to land reclamation, at execution in farmland of slope controlled leveling, in one or two directions (longitudinal or simultaneously longitudinal and transverse)
PRODUCER:
PRODUCTION YEAR:
2006
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
Download data sheet file (578.75 kb)
6. Stand for testing components, subsystems and conventional pneumatic systems with control and analogical display of working parameters
CATALOG NAME:
DESCRIPTION:
The stand is made by our specialists in original conception; Features -Installed power 2 x 5.5 kW (15HP); -Maximum testing pressure: 10 bar; -Size of testing appliances: (1/8 ... 1/2)" -Pressure precision measuring: 0.25% (pressure transducers), 0.5% (gauges) -Flow precision measuring: 3 % (flow transducers), 3% (flowmeters); - Loss flow measuring precision: max. 3% This stand includes input module, output module, digital interface, and electric control panels.
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
7. Testing device for medium and high pressure pneumatic linear actuators
CATALOG NAME:
DESCRIPTION:
This is a testing device of medium and high pressure pneumatic linear actuators, regarded as individual actuators or actuators within automatic systems. We can make static or dynamic tests. The device is provided with proportional equipment.
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
8. Pneumatic robot
CATALOG NAME:
DESCRIPTION:
This robot is used to check the software control of translation movement equipments. The usage domain of this system is recommended for those applications needing successive stops in several positions by moving of the handling object, by linear and rotational movements, at constant speeds and with a high degree of repeatability, successfully replacing the human operator. Features: - 3 smart axes, 4 liberty degree (translation on axes x, y, z and grapple rotation on z).
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
9. Monitoring system
CATALOG NAME:
DESCRIPTION:
This system monitors in real time the main testing parameters (pressure and flow). It includes modern automation electrical long-life components, especially designed to equip research laboratories stands.
PRODUCER:
Festo
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
10. Compressors
CATALOG NAME:
DESCRIPTION:
- 2 screw compressors, brand Renner (Germany), Type RSDK. Features: 530 l/min; 5,5 Kw; 13 bar; - 1 oil compressor, brand FIAC (Italy). Features: V= 200 l; Output = 3kW (4 HP); Pmax = 10 bar/145psi; Volt = 400; Hz = 50; - 1 oil compressor, brand Jun -Air (Denmark). Features: Ps = 16 bar; V= 25 l; T= -10/50 ºC; Volt = 230; Hz = 50; Current = 2.9 A
PRODUCER:
Renner (Germany); FIAC (Italy); Jun -Air (Denmark)
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
11. System for determining fluid properties
CATALOG NAME:
DESCRIPTION:
The Enigma Electronic Water Conditioning and Descaler System provides a proven, simple and cost-effective method to reduce hard water problems and costs. Features: Voltage = 110/240/12 V
PRODUCER:
Enigma Ind 1 (England)
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
12. Pneumatic flow meter, brand Kurz (USA), TYPE 504 FT-8
CATALOG NAME:
DESCRIPTION:
Features: Max. pressure 300/20; -20≤Tamb.≤60ºC; Ip 66; Input 24 VDC; Current 0.6 A
PRODUCER:
Kurz (USA)
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
13. Modular aggregate for instrumental air preparation, Code AMAI-2.25/16.4
CATALOG NAME:
DESCRIPTION:
This equipment is made of superabsorbent polymer materials. It is developed by our specialists in original conception. Features: V= 40 l; Degree of air filtration = (25-40) μm; Maximum working pressure = 4 bar; Rated air flow: 16 Nm3/h.
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
14. Electropneumatic positioners
CATALOG NAME:
DESCRIPTION:
Features: Prated= (7-10) bar; T= -10/60ºC; Piston diameter = 40 mm; Rod length = 40 mm; General Dimensions: Length = 64 mm; Width = 64 mm; Height = 64 mm.
PRODUCER:
SMC (Japan)
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
15. Pneumatic cylinders
CATALOG NAME:
DESCRIPTION:
-1 medium-size cylinder type DNCKE – 40 -130-PPV-A, 526482W908; Features: 06-10 bar P1min= 3.8 bar -1 large cylinder type DNCKE – 100 -200-PPV-A, 526484W808; Features: 06-10 bar P1min= 3.8 bar
PRODUCER:
Festo (Germany)
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
16. Mechatronic stand adapted to testing of energy recovery systems
CATALOG NAME:
DESCRIPTION:
The test stand consists of the following parts: - subassembly of module for testing, consisting of a load device, hydraulic machine and force transducer and speed for simulating the testing regimes; - hydraulic drive group with storage subsystem and conditioning of the working fluid, consisting of an oil tank equipped with temperature control system, pumping group, hydraulic command pump and hydraulic blocks; - the acceleration module subassembly consisting of hydraulic motor, force transducer and variable speed electric pump, which forms an subassembly of simulation of thermal engine drive; - cardan shaft, which performs mechanical connection between the two drives simulated - the thermal one and the hydraulic one; - storage subsystem of the pressurized fluid, consisting of two hydro-pneumatic accumulators; - electronic and automation equipment, composed of electrical subsystem of drive and control of operation and the testing regimes. The main technical characteristics of the test stand: - maximum operating pressure: 250bar - volumetric capacity of hydraulic machine: 0-45 cm3/ rev - load cylinder capacity: 63 cm3/ rev - volumetric capacity of hydraulic motor: 45 cm3/ rev - displacement pump drives: 8.2 cm3/ rev - work environment: H46 hydraulic oil - control/supply voltage: 24 Vdc / 220/380 Vac
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
2008
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
17. Mechatronic equipment for the recovery of braking energy
CATALOG NAME:
DESCRIPTION:
The mechatronic equipment for kinetic energy recovery is used to equip vehicles in order to recover kinetic energy from braking phases and use it in starting / acceleration phases. Technical characteristics: - power to start: 15- 20Kw - maximum braking power: 10-15W - maximum working pressure: 250 bar - control pressure: 50 bar - working environment: hydraulic oil - volumetric capacity: 0 - 45 cm3/ rev - maximum revolution of hydraulic machine: 2600 cm3/ rev - gear ratio: 1:1 - volume of the storage battery: 2x25=50 l - control pressure: 24 Vdc
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
2008
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
18. 3D printer kit
CATALOG NAME:
DESCRIPTION:
- nominal sizes: 20 cm X 20 cm X 20 cm - recommended printing speed: 50 mm / s - maximum printing speed: 200 mm / s - motor Nema17 4.4 kg*cm - two printing filament types can be used: ABS and PLA
PRODUCER:
PRODUCTION YEAR:
2017
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
19. Testing stand for the components of lubrication systems with data acquisition system
CATALOG NAME:
DESCRIPTION:
Technical characteristics: - number of sections of testing: 2 - working pressure: Section 1--250 bar; Section 2--700 bar - tested pumps: 0.3÷10 cm3 - power supply: 380 Vac/50 Hz - no of acquisition channels: 6
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
20. Equipment for hydrostatic radial bearings
CATALOG NAME:
DESCRIPTION:
-multiple hydraulic energy generation equipment 1 cm3/rev; 4 cm3/revt; 22 cm3/rev; 250 bar; 0.55 kW; 3 kW; 1000 rev/min - differential linear hydraulic motor ø80 / ø40 – 100; 15 mm - various hydraulic devices Dn6; Dn10; max 315 bar -auxiliary equipment and accessories (oil tank, fittings, pipes, etc.) - measuring equipment (transducers, flowmeters, gauges, etc.) -test set bearings
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
21. Equipment for hydrostatic axial bearings
CATALOG NAME:
DESCRIPTION:
- multiple hydraulic energy generation equipment 2.2 cm3/rev; 8.2 cm3/rev; max 230 bar; 5.5 kW; 1445 rev/min - axial piston engine 3.6 cm3/rev; 500 rev/min; 320 bar - various hydraulic equipment Dn6; max 315 bar - measuring equipment (transducers, flowmeters, gauges, etc.) - test set bearings
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
22. Equipment for research of the lubrication of linear sealing systems
CATALOG NAME:
DESCRIPTION:
-hydraulic generation equipment power 7.5 cm3/rev; max 315 bar; 4 kW; 1445 rev/min - linear hydraulic motor ø80 / ø56 – 126 - various hydraulic equipment Dn10; 315 bar - measuring equipment (transducers, flowmeters, gauges, etc.) - test set bearings
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
23. Demonstrative panel of the automatic lubrication installation with 2 lines
CATALOG NAME:
DESCRIPTION:
Technical characteristics - electric pump: 1.4-9.5 cm3 /min; - maximum pressure: max. 750 bar; - tank capacity: 3 l; - no of lubrication points: 6; - automatic control: VIP CONTROLER-DROPSA; - adjustable supply: 0.25-3 cm3 - adjustment pressure of valve: 300 bar - power supply: 380 Vac / 50 Hz. Application field - in industry in order to lubricate machine parts - in the tribology laboratories for testing specific components - in the training activity in the tribology field for functional demonstrations.
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
24. Demonstrative panel of the automatic lubrication installation with volumic dosage
CATALOG NAME:
DESCRIPTION:
Thechnical characteristics: - Maximum oil flow: 350 cm3 / min - Maximum pressure: 50 bar; - Tank capacity: 3 l; - dosing capacities: 0.03 – 1.0 cm3 / cycle; - automatic control:VIP-DROPSA; - power supply: 220 Vac / 50 Hz. Application field - in industry in order to lubricate machine parts - in the tribology laboratories for testing specific components - in the training activity in the tribology field for functional demonstrations
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
25. Demonstrative panel of the automatic lubrication facility with progressive dosing
CATALOG NAME:
DESCRIPTION:
Thechnical characteristics: - Maximum oil flow: 350 cm3 / min; - Maximum pressure: 40 bar; - Tank capacity: 3 l; - No of lubrication points: 6; - Automatic control: VIP CONTROLER-DROPSA; - Power supply: 220 Vac / 50 Hz Application field - in industry in order to lubricate machine parts - in the tribology laboratories for testing specific components - in the training activity in the tribology field for functional demonstrations
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
26. Demonstrative panel of the automatic lubrication facility by recirculation with electronic monitoring
CATALOG NAME:
DESCRIPTION:
- Maximum oil flow: 10 l / min; - Maximum pressure: 16 bar; - Tank capacity: 15 l; - No of lubrication points: 6; - automatic control: FACT 2000-DROPSA; - power supply: 220 Vac / 50 Hz. Application field - in industry in order to lubricate machine parts - in the tribology laboratories for testing specific components - in the training activity in the tribology field for functional demonstrations
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
27. LCM 20
CATALOG NAME:
DESCRIPTION:
icountLCM20 is a proven answer to fluid system contamination monitoring offering a 2-minute test procedure. Multi-standard ISO and NAS cleanliness reporting, data entry, data graphing and integral printing are all standard on this world proven contamination monitor. Test time 2 minutes Particle counts: International codes: MDT 4+, 6+, 14+, 21+, 38+, 70+ microns ACFTD 2+, 5+, 15+, 25+, 50+, 100+ microns Data retrieval: Memory access gives test search facility Max. working pressure 420 bar Max. flow rate: 400 l/min
PRODUCER:
PARKER
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
28. Brookfield digital viscometer
CATALOG NAME:
DESCRIPTION:
The Brookfield DV-I+ Viscosimeter measures fluid viscosity at given shear rates. Viscosity is a mesure of a fluid’s resistance to flow. The principle of operation of the DV/I+ is to drive a spindle (which is immersed in the test fluid) through a calibrated spring. The viscous grag of the fluid against the spindle is measured by the spring deflection. Spring deflection is measured with a rotary transducer. The measurement range of a DV-I+ (in centipoise or miliPascal seconds) is determined by the rotational speed of the spindle, the size and the shape of the spindle, the container the spindle is rotating in and the full scale torque of the calibrated spring. Input voltage 115 Vac or 230 Vac Input frequency 50/60Hz Power consumption 22 Watts Temperature sensing range -100°C to 300°C Operating Environment 0°C to 40°C
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
29. GPM Manual pressure generator
CATALOG NAME:
DESCRIPTION:
It is a system created to solve the problems of calibration and checking of dial manometers, transducers, pressure transmitters and pressure switches with a first line sample carrying ACCREDIA certification. The GPM manual pressure generators are a system created to solve the problemms of calibration and cecking of dial manometers, transducers, pressure transmitters and pressure switches with a first line sample carrying ACCREDIA certification. The pressure fluid is pressurised by means of an internal piston, which allows micrometric adjustment of the pressure with very low effort, thanks to a screw system. Structure is made of aluminium to increase its handiness and includes: a central tank where filling oil of hydraulic circuit flows into a spherical valve for unloading, a hermetic lock to ease transportation and two 1/2” gas couplings to connect first line samples to pressure gauges to be controlled. Pressure generator is provided with tight gaskets and travelling case, where there is room for two pressure gauges. Main features Range from 0 to 700 bar Dimensions: 230x180x40 mm 4.5 kg weight Made of aluminium alloy Rotating coupling with O-ring Oil feeding Quick pressure unloading system Built-in tank Vacuum pump to extract air from the circuit
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
30. Didactic stand for pressures, flow and speed rates
CATALOG NAME:
DESCRIPTION:
On this stand there are conducted tests on the rates of flowing through various devices, measurements of pressures and flow rates for various demonstration diagrams.
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
31. Device for measuring switching forces on some distribution equipment
CATALOG NAME:
DESCRIPTION:
It is a device for optimizing of the electrohydraulic amplifier type nozzle/flap in the structure of servo valves; it measures the forces and flow rates of fits type nozzle/flap in the structure of servo valves.
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
32. Motic BA 300 microscope
CATALOG NAME:
DESCRIPTION:
It performs, through a human operator, a microscopic counting of particles deposited on a calibrated filter membrane, and the result is assessed according to ISO and NAS standards. It has a video adapter that brings the image from microscope on the computer screen so the operator to monitor impurities deposited on the membrane. Image device CMOS 1/2'” Resolution 1.3 mega pixels, 1280x1024 pixels Pixel pitch 5.2 μm x 5.2 μm Max. frame rate 30fps@640x480, 30fps@320x240, 15fps@1280x1024 Shutter Electronic Dynamic range 54 dB S/N Scanning system Progressive Minimum illumination 3 Lux OS recommended Windows 2000/XP USB interface 2.0 minimum Voltage DC 5V±5% Operating current 200 mA Power consumption 1W Operating temperature -10°C~70°C Storage temperature -10°C~80°C Relative humidity 40%~90%
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
33. SELECTA VB 1423 Viscometer Bath
CATALOG NAME:
DESCRIPTION:
Water bath is used to determine the viscosity values. It has 3 ports for fixing the glass viscometers and a port for the thermometer. The enclosure is made of borosilicate glass. Its capacity is 20 liters. Inside the bath there is a white board to optimize readings. It has a PT100 heat resistant temperature sensor which maintains the control in the bath; Digital control panel. Environment temperature range +5...+100°C Capacity 20 l Resolution 0.1°C Enclosure sizes ø 320 x 300 mm External sizes ø 470x300 mm Homogeneity ±0.05°C Stability ±0.05°C Read error ±0.09°C Power 1000W Weight 8kg Optional accesories: Universal viscometer support, made of PTFE Thermometers
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
34. Stand for applied research and experimental testing of hydraulic rotary machines
CATALOG NAME:
DESCRIPTION:
Features: - maximum flow rate: 50 l/min - maximum pressure: 300 bar - maximum rotational speed: 2000 rev/min - maximum torque: 150 Nm - accuracy of measuring: class 1 - automatic data acquisition and processing.
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
35. Stand (I) for applied research and experimental testing of hydraulic parts and equipment
CATALOG NAME:
DESCRIPTION:
Features: - maximum flow rate: 45 l/min - maximum pressure: 350 bar - accuracy of measuring: class 1 - automatic data acquisition and processing.
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
36. Stand (II) for applied research and experimental testing of hydraulic parts and equipment
CATALOG NAME:
DESCRIPTION:
Features: - maximum flow rate: 150 l/min - maximum pressure: 350 bar - accuracy of measuring: class 1 - automatic data acquisition and processing.
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
37. High pressure stand for applied research and experimental testing of hydraulic parts and equipment
CATALOG NAME:
DESCRIPTION:
Features: - maximum flow: 20l/min - maximum pressure: 1000 bar - accuracy of measuring: class 1 - automatic data acquisition and processing.
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
38. Stand for testing proportional electromagnets
CATALOG NAME:
DESCRIPTION:
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
39. Stand for testing hydraulic dampers
CATALOG NAME:
DESCRIPTION:
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
40. Gravimetric dosing system - Equipment for blended wines
CATALOG NAME:
DESCRIPTION:
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
41. SR780 — 100kHz two-channel dynamic signal analyzer
CATALOG NAME:
SR 780
DESCRIPTION:
• DC to 102.4kHz bandwidth • 90dB dynamic range • Low-distortion synthesized source • 45dB dynamic range in swept-sine mode • Real-time octave analysis • Up to 32 Mbyte memory • GPIB and RS-232 interfaces
PRODUCER:
Stanford Research System
PRODUCTION YEAR:
2007
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
Download data sheet file (1305.7 kb)
42. TEKTRONIX DPO3014 Oscilloscope
CATALOG NAME:
DESCRIPTION:
4 Analogue channels, 100 MHz, 2.5 GSPS, 5 Mpts, 3.5 ns
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
43. Stand for testing electro-hydraulic adjusting equipment in static and dynamic regime
CATALOG NAME:
DESCRIPTION:
Maximium flow 120 l/min; Pmax = 315 bar Destination (types of tested equipment): - Electro-hydraulic servo-valves size 6 ÷ 10 - Proportional directional valves DN 6 ÷ 10 - Proportional pressure valves Pmax = 315 bar
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
2007
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
44. Programmable power supply
CATALOG NAME:
HM 7044
DESCRIPTION:
4 channels, 0…32 V; 0…3 A
PRODUCER:
Hameg Germany
PRODUCTION YEAR:
2009
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
Download data sheet file (2033.72 kb)
45. Arbitrary/Function Generator
CATALOG NAME:
AFG 3022B
DESCRIPTION:
25 Mhz, 250 MS/s
PRODUCER:
Tektronix
PRODUCTION YEAR:
2007
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
Download data sheet file (217.5 kb)
46. Data acquisition board
CATALOG NAME:
USB-6218
DESCRIPTION:
Isolated 32 AI, 2 AO, 8 DI, 8 DO, Bus-Powered USB
PRODUCER:
NATIONAL INSTRUMENTS
PRODUCTION YEAR:
2008
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
Download data sheet file (926.48 kb)
47. Soldering / Desoldering Station
CATALOG NAME:
WMD-3 Multi Digital
DESCRIPTION:
230 V, 310 W, 50-450 °C
PRODUCER:
Weller
PRODUCTION YEAR:
2007
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
Download data sheet file (1166.34 kb)
48. Measuring amplifier in desktop housing
CATALOG NAME:
Scout 55
DESCRIPTION:
The essential features: • Transducers that can be connected: S.G. full and half bridges, inductive full and half bridges, piezoresistive and potentiometric transducers, LVDT • 10-digit alphanumeric display • Using the touch-sensitive keypad • 2 peak value stores for maximum and minimum values, as well asenvelope and instantaneous value • 4 limit switches • RS232 serial interface for connecting a computer or a printer • Parameter memory for saving up to 8 complete data sets • Control inputs and outputs (potential-separated through optical couplers) • Manageable housing with mounting frame / carrying handle
PRODUCER:
HBM
PRODUCTION YEAR:
2008
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
Download data sheet file (700.29 kb)
49. Service case with test unit for servo & proportional valves with embedded electronics
CATALOG NAME:
VT-VETSY-1
DESCRIPTION:
Features • Service case contains test device, 24 V power supply unit, connection cable and adapter cable (see ordering code) • The test device is suitable for the control and functional testing of proportional valves with integrated electronics and an operating voltage of ±15 V or +24V • makes commissioning and troubleshooting hydraulic systems with proportional valves easier • Service case: – Dimensions (W x H x D) 450 x 100 x 350 mm – Weight empty 2 kg, complete 4.3 kg
PRODUCER:
Bosch-Rexroth
PRODUCTION YEAR:
2008
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
Download data sheet file (475.41 kb)
50. SensoControl Diagnostic kit
CATALOG NAME:
PDS3
DESCRIPTION:
Capabilities: • Hand held diagnostic meter • Measure and Display -Pressure -Flow -Rational Speed -Temperature Features: • Four sensor inputs • Intuitive operation • Rugged design • Auto sensor recognition • Four line numerical display • Calculated channels • Store data on device • SensoWin software utility • Scan rate of 1ms
PRODUCER:
PARKER
PRODUCTION YEAR:
2007
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
Download data sheet file (1868.3 kb)
51. Testing stand of electro-hydraulic adjustment elements in static and dynamic operating modes
CATALOG NAME:
DESCRIPTION:
Qmax = 120 l/min; Pmax = 315 bar Destination (types of equipment under tests): - Electro-hydraulic servo valves RD 6 ÷ 10 - Hydraulic proportional directional control valves RD 6 ÷ 10 - Hydraulic proportional valves
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
52. 4 column type vulcanizing press
CATALOG NAME:
DESCRIPTION:
- hydraulic drive - electric heating of pan - maximum working pressure 250 bar
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
53. Set of moulds for seal vulcanization
CATALOG NAME:
DESCRIPTION:
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
54. Tensile testing equipment for rubber test specimens and plastic products
CATALOG NAME:
DESCRIPTION:
Accuracy: ± 0.3 % F.S. Data sampling rate: 1000 Hz Units: N, kgf, ozf, and lbf. (Selectable) Measurement mode: Track, Peak and Preset
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
55. Analytical balance
CATALOG NAME:
XA 4Y.A PLUS analytical balance
DESCRIPTION:
Reliable Results and Excellent Weighing Parameters The best weighing parameters enable applying XA 4Y.A PLUS analytical balances in majority of demanding laboratory processes. This means that the XA 4Y series features numerous functions for protecting and monitoring work results of particular operators. Smart Min Weight With use of the „Smart Min Weight” function, the XA 4Y.A PLUS automatically adjusts resolution of the range to the currently weighed mass. This results with improvement of the minimum sample weight parameter by 30%. Innovative 2-Point Adjustment System Brand new adjustment system guarantees the highest measurement accuracy. It minimizes linearity errors simultaneously providing reliable indications for the whole weighing range. Antistatic Weighing Chamber XA 4Y.A PLUS analytical balance is a device where the influence of electrostatics onto the weighing result has been eliminated due to use of special antistatic coating of the glass panes, and thanks to an in-built ionizer. Ergonomic Mechanical Design Latch-type system of weighing chamber components fastening allows fast and easy tool-free assembly/disassembly. Smart system of pressures equalization guarantees stable measurement. It eliminates errors generated by rapid change of pressure inside the weighing chamber.
PRODUCER:
RADWAG, Poland
PRODUCTION YEAR:
2020
COMMISSIONING DATE:
DATA SHEET:
Download data sheet file (1781.72 kb)
56. Drying oven
CATALOG NAME:
DESCRIPTION:
- External display (LED) - Ability of cyclic repeating of selected program - RS 232 interface (ability of PC or printer connection) - Stainless steel interior - Timer - Over temperature sound alarm - Air exchange regulation - Setting of temperature reading time - Setting start delay (range 1 min - 99 hours)
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
57. Device for measuring the phreatic level in hydrogeological wells
CATALOG NAME:
DESCRIPTION:
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
58. Stand for testing hydraulic equipment / devices on water
CATALOG NAME:
DESCRIPTION:
The stand is intended to test in laboratory conditions operation and control elements, namely to test hydraulic drive systems which use water as working fluid. This stand is composed of a WILO ECONOMY CO-2 MHI 206/ER-RBI-CALOR pumping group, consisting of two horizontal high-pressure centrifugal pumps, without self-priming, connected in parallel, and a stainless steel tank with capacity of 1 m3, and also devices for working parameters measurement and control. The main features of the pumping group are: suction fitting: 2 ", discharge fitting: 2 ", maximum flow rate: 10 m3/h, maximum pumping height: 67 m, supply voltage: 380 V, electrical power: 1.1 kW, no of pumps: 2, protection level: IP 54.
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
Download data sheet file (78.92 kb)
59. Double diaphragm dosing pump with hydraulic control - Experimental model
CATALOG NAME:
DESCRIPTION:
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
60. Double diaphragm dosing pump with mechano-hydraulic control - Prototype
CATALOG NAME:
DESCRIPTION:
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
61. Stand for digital hydraulics
CATALOG NAME:
DESCRIPTION:
The stand is designed with a 300-liter oil tank to which 2 electro pumps (15 kW and 20 kW) are attached to which the electric motors drive each of them one gear pump. At this stand there are attached 3 devices specific to digital hydraulic pumps, switching digital hydraulic directional control valves and 3 (possibly 5) distinct areas digital hydraulic cylinders. The nominal pressure is 150 bar. The control frequency of the directional control valves is 120 ÷ 150 Hz. The stand has in the electric control panel an electronic control and data acquisition block. This stand is built to demonstrate the functionality of digital equipment and provides acceptable measurements (range > 2.5) of the functional parameters.
PRODUCER:
INOE 2000 - IHP
PRODUCTION YEAR:
2017
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
62. Stand for testing parameters in obtaining pellets and briquettes by pressing
CATALOG NAME:
DESCRIPTION:
The stand ensures production of pellets and briquettes in laboratory with permanent control of compression and removal speed using hydraulic actuators. The realization device allows data acquisition during operation and ultimately allows a correspondence between the density of the pellets and briquettes and their removal speed, totally in accordance with the shape and size of the holes from the manufacturing sieve. The sieve support device allows testing of sieves with a maximum diameter of 100 cm and a maximum hole length from the sieve of 40 mm. The maximum working pressure is 150 bar, and the maximum displacement speed is 0.3 m/s.
PRODUCER:
INOE 2000 - IHP
PRODUCTION YEAR:
2017
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
63. System for testing of digital hydraulic cylinders
CATALOG NAME:
DESCRIPTION:
The System for testing of digital hydraulic cylinders consists of testing device, hydraulic control block, data acquisition system and software with embedded graphical user interface. All tracked parameters (force, speed, stroke, pressure, flow) are displayed by a computer in graphical form, in real time, and the acquired data is saved in a database. The system is equipped with a hydraulic station with a 50-l tank and 16-l/min electropump, a pressure control and distribution block, and oil filtering system. The flow rate provided by the electropump is adjustable by adjusting the speed of the electric motor by means of a frequency converter. Pressure is adjustable in the range of 6 … 120 bar.
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
2017
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
Download data sheet file (215.19 kb)
64. Energy conversion and pneumatic storage facility
CATALOG NAME:
DESCRIPTION:
At the facility inlet we have a KAESER compressor driven by an electric motor with a power of 7.5 kW, which provides a maximum pressure of 8 bar. The compressed air tank has a capacity of 350 l and withstands a maximum working pressure of 11 bar. For research purposes, the compressor can also be driven in other modes (mechanically, hydraulically), for validation of concepts related to energy conversion. In the area of energy reuse, a rotary pneumatic motor is connected, using the specific pneumatic equipment; the motor can drive an electric generator, a hydraulic pump or a linear pneumatic motor, depending on the intended purpose.
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
2018
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
Download data sheet file (108.01 kb)
65. Dual Column Universal Testing Machine
CATALOG NAME:
DESCRIPTION:
The dual column universal testing machine is hydraulically operated and servo-controlled. It can be used for mechanical testing of metallic materials and others. Technical specifications: • Force developed: 100 kN • Maximum speed: 1 m/s • Maximum stroke: 1.5 m • Rated working pressure: 200 bar • Force, position and acceleration sensors
PRODUCER:
PRODUCTION YEAR:
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
DATA SHEET:
66. Stand for testing hydrostatic transmissions
CATALOG NAME:
DESCRIPTION:
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
2017
COMMISSIONING DATE:
DATA SHEET:
Download data sheet file (610.04 kb)
67. Test stand for gas generators working on the TLUD principle
CATALOG NAME:
DESCRIPTION:
The stand is composed of a gas generator on the TLUD principle with adjustable gasification and combustion air flows and a data acquisition system that can monitor the temperatures achieved in the gas generator and the upper flame, combustion and gasification air flows, gasification air pressure and hourly fuel consumption. The gas generator works on the TLUD (Top-Lit-Up-Draft) principle with the help of which synthesis gas (syngas) is produced following a substoichiometric combustion in a reactor in which the pyrolytic front advances from top to bottom in the biomass layer. Main technical features: - Thermal power: .......................................................................................... 4 kW; - Load capacity: ........................................................................................... 1-5 kg; - Approx. operating duration with one batch ................................................ 1-5 h; - Maximum efficiency: ................................................................................... 85%; - Fuel: ............................................... ................................. wood chopping, pellets.
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
2021
COMMISSIONING DATE:
DATA SHEET:
Download data sheet file (246.65 kb)
68. Multifunctional test stand
CATALOG NAME:
DESCRIPTION:
Stand structure / Basic technical characteristics: 1- Minicompressor 11 bar 2- Multi-parameter portable kit 3510 IDS 3- Precision scale KERN EW 6200-2NM 4- Sound level meter model RS-232: SL-4012 5- Vibration meter / tachometer - The VT-8204 combo 6- KERN scale (max. 300 kg, accuracy 0.1 kg) 7- Source PEAK TECH 6080 A 8- Thermohygrometer HI 91610 C 9- Electrical parameters kit FLUKE 434 10- Thermal imaging camera FLUKE Ti 20 11- Infrared rangefinder 12- Force cell 0-300 kg 13,14- Tool kits 15- Multimeter device METRA HIT 29 S
PRODUCER:
INOE2000-IHP
PRODUCTION YEAR:
2021
COMMISSIONING DATE:
DATA SHEET:
Download data sheet file (555.61 kb)
69. Stand for testing medium pressure pneumatic actuators under dynamic regime
CATALOG NAME:
DESCRIPTION:
The stand consists of (see photo): 1. Compressed air source-compressor + air preparation unit 2. The test device consisting of: Framework; Medium pressure actuator-ALP; Displacement transducer reflex type - TDR; Pressure transducers-TP1 and TP2; Proportional directional valve-DP 3. Data calculation and acquisition system The testing program, developed in the LabVIEW environment is composed of block schemes that lead the test in automatic mode. The results consisting of diagrams and databases are saved automatically. The tests performed highlight the main factors and methods of influence on their dynamic behavior, with no load, and they consist of: a. the response to the step signal in three points of the stroke, at constant pressure-8 bar; b. the response to sinusoidal signal with initial amplitude, from minimum value to maximum value, for three values of the stroke; c. determining the minimum starting pressure of the pistons of the pneumatic actuators for the two directions of travel (rod chamber and piston chamber).
PRODUCER:
INOE2000-IHP
PRODUCTION YEAR:
2015
COMMISSIONING DATE:
DATA SHEET:
70. Test stand for an active heave compensator
CATALOG NAME:
DESCRIPTION:
Intended usage: The equipment, which can simulate vertical heaves, is used to demonstrate the operation / experimental testing of the dynamics of hydraulic servo cylinders, dedicated to active heave compensators or the active component of hybrid heave compensators, which equip floating cranes and drilling rigs. Structure of the stand: 1= mobile assembly, which is a welded construction, made of steel corner bar with equal wings, on which the Moog servo cylinder is fixed, item #2, with the help of 4 screws M8x1 and l=35, 4 nuts M8 and 4 flat washers B8, items #3, #4 and #5. The movable assembly can be moved inside a fixed assembly. 10= fixed assembly, which is a welded construction, made of steel corner bar with equal wings, on which the Parker servo cylinder is fixed, item #11, with the help of 4 screws M12x1.25 and l=40, 4 nuts M12x1.25 and 4 flat washers B12, items # 7, #8 and #9. 6= connecting component, which is a coupling for gripping the rods of the two servo cylinders, items #2, #3. 12= electrical and control cabinet, which contains an electrical panel and a PLC, connected to a PC, for servo cylinders control and data acquisition from the stroke transducers. Test parameters: - idle (no load) working pressure: max.40 bar (adjusting pressure of the stand safety valve); - working pressure under load: max.310 bar (adjusting pressure of the stand safety valve); - maximum working flow: max.50 l/min. (for each pressure branch); - useful power required for the pumping group (for p=40bar and Q=100l/min): 7 kW; - maximum power required for the pumping group (for p=300bar and Q=100l/min): 50 kW; - supply voltage for drive motor of variable flow positive displacement pump: 380 V AC; - supply voltage for coils of servo valves torque motors: 24 V DC; - working range of displacement transducers of hydraulic servo cylinders: -10V…+10 V.
PRODUCER:
INOE 2000-IHP
PRODUCTION YEAR:
2018
COMMISSIONING DATE:
DATA SHEET:
Download data sheet file (559.18 kb)
71. Workstation with SOLIDWORKS Professional software (numerical simulation modules included)
CATALOG NAME:
DESCRIPTION:
Workstation with SOLIDWORKS Professional Software (CAD & CAE) Overview: The Workstation with SOLIDWORKS Professional Software is a high-performance computing solution designed specifically for professionals working with computer-aided design (CAD) and computer-aided engineering (CAE) applications, with a focus on SOLIDWORKS software. This workstation offers a powerful hardware configuration and has installed the SOLIDWORKS Professional software, which providing a seamless and optimized environment for efficient design and analysis tasks. Specifications: 1. Processor: • Intel Core i9900k (9th generation or later) 2. Memory: • 16 GB DDR5 RAM (expandable up to 64 GB) 3. Graphics Card: • NVIDIA Quadro RTX A4000, 12 GB dedicated video memory, certified SOLIDWORKS graphics card for optimal performance and compatibility 4. Storage: • Solid-state drive (SSD) with a minimum of 512 GB capacity • HDD 1TB 5. Operating System: • Windows 10 Professional (64-bit) 6. Display: • 32-inch monitor with 2K resolution
PRODUCER:
PRODUCTION YEAR:
2023
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
10.001 € – 50.000 €
DATA SHEET:
Download data sheet file (239.87 kb)
72. EinScan-SP 3D scanner and "EXScan S" software
CATALOG NAME:
DESCRIPTION:
PRODUCER:
Shining 3D
PRODUCTION YEAR:
2022
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
less than 5.001 €
DATA SHEET:
Download data sheet file (527.77 kb)
73. Prusa SL1S 3D printer (MSLA technology) and "PrusaSlicer" software
CATALOG NAME:
DESCRIPTION:
Technical Parameters: Display type Monochrome LCD with high-performance lens system LCD resolution 5.96'', 2560×1620p LCD lifespan / warranty 2000 hours Print volume size 127×80×150 mm Layer exposure time 1.3 - 2.4 seconds depending on material and layer height Tilt time 3 seconds Supported layer heights 0.025-0.1 mm Minimal layer height 0.01 mm Supported materials UV sensitive liquid resin (405nm), long-exposure materials supported Connectivity: USB, Wi-Fi, LAN SL1S printer box dimensions: 320×450×500 mm (X×Y×Z) SL1S dimensions: 8.8×9.3×15.7 in / 225x237x400 mm (X×Y×Z) SL1S energy consumption while printing: ~100W (±5W)
PRODUCER:
Prusa
PRODUCTION YEAR:
2022
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
less than 5.001 €
DATA SHEET:
Download data sheet file (74604.59 kb)
74. Dedicated mechanical testing stand for compression, tension and bending-deflection with electronic DAQ and Labview communication
CATALOG NAME:
DESCRIPTION:
A SAMAtools motorized test stand HDV-10K, the stand dedicated to testing plastic and flexible materials is capable of generating a force of 10,000 N; it is equipped with a load cell that can measure 5,000 N and a transducer that precisely measures the distance between the two jaws of the traction machine.
PRODUCER:
PRODUCTION YEAR:
2023
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
5.001 € - 10.000 €
DATA SHEET:
Download data sheet file (192.41 kb)
75. Station for washing and post-processing for MSLA printing technology
CATALOG NAME:
DESCRIPTION:
Technical Parameters: 4 UV LED strips to cure the printed models UV LED wavelength: 405 nm Max power of the UV LED: 52,8 W EEE group: 3 (IT and/or telecommunication equipment) Power supply: Input 100-240VAC, 50/60Hz, 2.0A. Output: 24V, 6.67A, 160W Average power consumption: 130W Max. working temperature range: 16 °C - 38 °C, indoor use only Working humidity: 85 % or less CW1S box dimensions: 390×400×460 mm (X×Y×Z) CW1S dimensions: 218×232×345 mm (X×Y×Z) CW1S energy consumption: o Preheating / Drying: ≤ 135W o UV curing: 50W o Washing: 6W
PRODUCER:
Prusa
PRODUCTION YEAR:
2022
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
less than 5.001 €
DATA SHEET:
Download data sheet file (505.57 kb)
76. Dedicated ultrasonic bath for 3D printed parts washing
CATALOG NAME:
Ultrasonic cleaner Geti GUC 03B 3L Stainless Steel
DESCRIPTION:
Geti GUC 03B ultrasonic cleaner with heater cleans all surface impurities only with the help of water and vibrations generated by ultrasound. Ultrasonic cleaning is based on a cavitation effect caused by high-frequency vibration signals of ultrasonic waves in the fluid. Microscopic bubbles are formed and rapidly imploded, which causes intensive cleaning on the surface of the object. The bubbles are small enough to penetrate the microscopic slits and thus thoroughly clean the object. This Geti ultraosnic cleaner is used for cleaning a wide range of tools and mechanical components. Product parameters: - digital display - full metal design - ceramic heaters for better heating - moulded tank without welding gap for better watertightness - cooling fan - moisture resistant base plate - tank volume: 3l - working frequency: 40 kHz - heating settings: 0-80 ° C - heating power: 100W - material: stainless steel SUS304 - bath size: 240x140x100 mm - digital timer: 1-99 min - ultrasonic power: 120W - power supply: 220-240V AC / 50 Hz - dimensions: 270x170x240 mm
PRODUCER:
Geti
PRODUCTION YEAR:
2022
COMMISSIONING DATE:
PRICE RANGE (at the time of purchase)
less than 5.001 €
DATA SHEET:
Download data sheet file (188 kb)
77. MBL2000 series - Transmitted light microscope
CATALOG NAME:
Laboratory microscopes
DESCRIPTION:
The robust all-rounder. This model is ideal for general microscopy in laboratories and universities. The MBL2000 offers an extensive range of add-on options: For example, with phase-contrast setting, a dark-field condenser, micrometre setup, planachromatic objectives and additional eyepieces. A binocular optical head offers inclined viewing and interocular adjustment. A wide range of accessories is available for this model. - Dioptre compensation with compensation scale - Sturdy metal stand - Coarse and fine focussing, double coaxial (0–200 μm, division 2 μm), coarse and fine focussing range: 30 mm - Right-side coarse focussing knob with fast focus adjustment, left-sided knob with quick-focus setting - Graduated XY cross table with coaxial operation - Low-voltage illumination with lighting control and removable pre-condenser - Twin-lens Abbe condenser: NA 1.25 - Iris diaphragm - Pivoting filter holder - Height adjustment - Glass filters: blue, yellow, green - Power supply: 230 V
PRODUCER:
A. Krüss Optronic, Germany
PRODUCTION YEAR:
2012
COMMISSIONING DATE:
DATA SHEET:
Download data sheet file (1277.49 kb)
Phone:
+4021 3363991
Fax:
+4021 3373040
Cutitul de Argint
,
14
,
Bucharest
040558
,
Bucuresti - Sector 4
Romania
Loading Infrastructure
[T: 3.1506, O: 1988]
Notification!
EERTIS
has replaced eeris. From now on, all updates and account activities will be on
EERTIS
. However, you can still migrate your remaining data from eeris to
EERTIS
.